For sale is a new Low Coolant Alarm to suit the 200Tdi and 300Tdi engines on the:

  • Land Rover Defender
  • Discovery 1
  • Range Rover Classic (that have the big radiator plug)
  • It is also suitable for Land Rover Series 1 vehicles with Copper Radiator

This is a quality kit developed by Engine Saver and is designed to save overheating of your vehicle (and costly repairs) by letting you know as soon your coolant drops below a certain level.

It comes with Full Installation instructions.

Kit contains:

Screw in sensor to replace the nylon air bleed screw in the top of the radiator Snap in bezel for the warning light and surround sticker Cable ties Premade connector cable from the module to the sensor

Manufacturer details:

An Engine Saver® is a device which monitors the coolant level in an engine. Low coolant alarms are fitted to very few engines as standard equipment by manufacturers. When the coolant level drops due to a split hose| a stone through the radiator| a faulty pump seal or simply because the radiator cap wasn't replaced properly this device is designed to help warn you before any engine damage is done.

Over 70% of major engine blow-ups are caused by coolant loss going un-detected. In fact the normal temperature gauge will drop in cases of sudden coolant loss as the sensor in the cylinder head needs coolant around it to work properly. When a heater or radiator hose splits or blows the coolant is suddenly lost in a matter of seconds - the temperature gauge reading drops| the engine overheats and expensive damage is done. When a stone or rock damages the radiator core coolant is lost. If you are lucky the temperature gauge will rise and you may notice it in time. If you miss it or the coolant is lost rapidly| preventing the gauge from working| goodbye engine.

Same thing with a faulty water pump seal. Most water pump seals when they fail| first weep a little bit of coolant when the engine is running. When the engine is switched off for the night| the coolant steadily leaks out under the vehicle. Next morning the engine is started and the vehicle driven away. The coolant level is low| the temperature gauge doesn't read correctly and the engine cooks. An Engine Saver® can be fitted to any engine by a mechanic| auto electrician or home handyman in less than an hour without drilling holes in radiators or tanks and using normal hand tools.

SKU ESSLR2
Brand Engine Saver
Shipping Weight 0.5000kg

Be The First To Review This Product!

Help other 4WD Industries users shop smarter by writing reviews for products you have purchased.

Write a product review