Carbon Offroad Send-It Uca - Fits Toyota Hilux N80 Revo Upper Control Arms UCA-TOY2
SKU code: UCA-TOY2
$598.00
Get a set of Carbon Send-IT Upper Control Arms to complete your build!
Your mates will definitely notice that you have a set of Carbon Send-It UCA'S with its bright red finish.
Go Full Send with Carbon Send-It UCA's
and
Why do you need and Upper Control Arms?
When and you are and lifting your 4wd it alters the wheel alignment and and this will lead to premature tyre wear and affect the handling of your 4wd and if not dealt with.
This gives the room to have adjustment in higher 4WD lifts and the ability to get the alignment correct at this higher height.
and
When it comes time to lift or modify your and IFS 4wd vehicle the first sign of trouble is usually the alignment and handling of the front suspension. While minor adjustments can usually be done with the lower camber bolts| bigger lifts will need a lot more!
Another problem many find is that once a longer travel shock or a spring package that allows increased travel is fitted| the upper control arms may contact the chassis or the spring itself. A steeper angle on the upper control arm moves the steering knuckle inboard and increases the angularity on the ball joints| sometimes maxing out their movement.
With a raised suspension height| the OEM upper ball-joint is forced to operate at an extreme angle and wider tires may not clear the factory upper control arms. An over-stressed OEM ball-joint also has the potential to separate or break| leading to catastrophic failure of suspension| steering| and CV axle. The preferable solution is to replace the factory upper control and arm with a newly designed arm| which allows greater clearance for the thicker or heavier aftermarket coils generally required to lift the vehicle.
The Carbon Send-IT Upper Control Arms feature and quality and ball joints and high-quality rubber bushings| they are and designed to correct alignment angles while maintaining factory ride quality. the H/D and steel design and provide the strength and durability needed for the most demanding environments.
Notes :
- Does not include and Installation guide or manual
- Recommended for professional Installation and
- Fits only 4WD Model & and 2"+ Lift and
- When installing these control arms| please raise and your vehicle's and knuckle to make the control arm sit at ride height and before tightening and the inner control arm bushing. This will extend the life span of the bushing and prevent preload on the bush. and
You might need to increase and the size of your wheels and to fit this item.
Requires clearance between top of ball joint and the inside of the wheel.
| SKU | UCA-TOY2 |
| Brand | Carbon Offroad |
| Shipping Weight | 8.0000kg |
Be The First To Review This Product!
Help other 4WD Industries users shop smarter by writing reviews for products you have purchased.
