Brown Davis Auxiliary Long Range Fuel Tank 110L suitable for Toyota Landcruiser 79 Series HZJ79 Dual Cab models built from 2012 to present (Transfer System)

This is a Brown Davis brand 110 litre heavy duty Auxiliary long range fuel tank with a transfer system design. The driver can pump the fuel from the Brown Davis auxiliary fuel tank into the vehicles standard fuel tank by flicking a switch.

The fuel will then be pumped into the vehicle standard tank and then fed to the engine.

The driver can check the fuel level of the auxiliary fuel tank at all times and once this becomes empty an alarm will sound telling the driver to switch pump system off. The driver can feel safe not to have the pump running and avoid potential pump failures 

It comes with easy to follow step by step fitting instructions and minimal tools are required for fitment.

Specifications of the Long Range Tank:

PART NUMBER: TL79A2
TANK TYPE: AUXILIARY
CAPACITY:110 LITRE
FILLER POINT:DRIVERS SIDE BEHIND CABIN
FUEL SUPPLY METHOD: TRANSFER PUMP (INC)
TANK LOCATION: UNDER MIDDLE OF VEHICLE
FITTING TIME: 5 hour/s

Why do you need a Long Range Fuel Tank:

These Top-Quality Brown Davis Replacement and Auxiliary Long Range Fuel Tanks are an engineered solution to enable you to travel further with less fuel stops.

They will provide your 4x4 petrol and diesel Offroad vehicles or pickup trucks| that extra high capacity fuel greatly engineered in oversized external and spare gas tanks manufactured with the highest construction materials.

They are designed to give maximum fuel capacity without affecting ground clearance| ramp over or departure angle| whilst being exceptionally strong to withstand the most rigorous of conditions.
Brown Davis long range tanks allow you to travel to the most remote parts of the globe where the standard tank would not take you.

All Brown Davis Tanks come with a 3 Years Warranty.

Fuel Tank Construction and Impact Resistance:

All Brown Davis long range fuel tanks are constructed from high grade 2mm 14-gauge aluminium coated cold rolled steel| to ensure maximum strength and durability.
This gauge of steel is sufficiently resistant to impact damage that additional tank guards are not necessary (most standard tanks are less than 2mm in material thickness).
The aluminium coating on the specific steel used by Brown Davis| offers the best of both worlds with the strength and fatigue resistance of steel and the anti-corrosion properties of aluminium.

*** PLEASE NOTE: IMPORTANT INFORMATION ***

The State of NSW requires the installation of modified fuel tanks / auxiliary fuel tanks to be inspected and certified by an automotive engineer
Please check the State or Territory regulations in your area

Brown Davis tanks and underbody protection plates are very popular and sell quite quickly
They are manufactured in batch runs to suit particular models
There is currently a delay of up to 12 weeks from the date of your order while they are made
We have added quantity to this listing to allow pre-orders to be placed
This will ensure you get the first available| shipped directly from the factory to you