Diff brace kits are a DIY kit made easy.

There is a 4mm steel folded top brace to weld along the passenger side top of the diff| a 10mm steel ring for protecting the drain plug| 4 laser cut 10mm gussets to fit above and below the knuckles.

A welder is required.

Please note: Once a top diff brace is fitted to the diff| the brace to sump clearance should be checked| bump stops may need to be lowered to allow for the extra height of brace.

Due to the design of the lower knuckle gussets| if this kit is to be used in a vehicle fitted with Castor plates or Superflex arms the gusset will need to be welded to the plates.