Please Note: Due to supply issues| the colour of the coil springs you receive may vary from the coils pictured. All coils used in Superior Engineering Kits are made from quality Australian manufacturers.

Superior Engineering has put together a 3 inch lift kit Suitable For current model Toyota Hilux / Vigo with our New Superior Monotube IFP shock absorbers and front struts.

This lift kit includes the following 4x4 accessories and parts:

• 2 x Rear leaf springs
• 2 x Front coil springs
• 4 x U-bolts
• 12 x Poly bushes
• 2 x Greasable rear shackles
• 2 x Front Superior Monotube IFP Struts
• 2 x Rear Superior Monotube IFP Shocks
• 1 x Sway Bar Relocation Kit
• 2 x Superior Engineering Upper Control Arms
• 1 x Diff Drop Kit
• 2 x Strut Tops

This kit comes with the front struts assembled with a coil of the selected spring rate| ready to install in your vehicle.
Having the front struts shipped assembled means you don't require a coil compressor for the fitment of this kit.

This kit also levels out the suspension by lifting the front higher than the rear. Generally| the rear will be lifted by 1" less to match the front and give a more even ride height.

Warning: When lifting an IFS vehicle over 2" inches it will not drive or handle the same as a factory-height vehicle. Additional noise| wear| tear and maintenance can be expected.

NOTE: Superior IFS Lift Kits will generally lift the front the full amount but the rear will be brought up to match the front.
In most cases| this means the rear will have a 1" lower lift then the front| this gives a more level ride height.